Tractor Sugarcane Loader Full CAD Design

I need a complete, production-ready engineering package for a tractor-mounted sugarcane loader. Your job starts from my rough concept sketches and ends with a set of documents my fabricator can pick up and build without further clarification. Scope of work • Create a solid 3D model in STEP format covering the full assembly, with special attention to the hydraulic system, load-handling mechanism and operator control panel. • Produce fully detailed manufacturing drawings: part drawings with tolerances, assembly drawings with exploded views, and an overall layout showing mounting points on a standard 45–60 HP farm tractor. • Size all pins, cylinders, hoses and structural members for typical field conditions (≈500 kg bundle capacity) and include basic FEA or hand calculations to justify the main boom, mast and grab. • Develop a concise bill of materials listing commercial off-the-shelf hydraulics alongside any custom-fabricated parts. • Draft a short maintenance and safety note set so the operator’s manual team can drop them straight in. What I already have Only rough sketches, reference photos and a description of the workflow in the field. These will guide dimensions, swing radius and reach, but you’ll refine them into a professional design that meets good agricultural-equipment practice. Deliverables (all digital) 1. STEP master assembly and all referenced part files 2. PDF drawing set ready for print/shop use 3. Editable drawing files (DWG or native CAD) for future tweaks 4. BOM in XLS or CSV 5. Brief design justification memo Acceptance criteria • Loader mounts within 4 hr using standard tractor hitch points • Lifts and swings a 500 kg load through 180° without structural yielding in analysis • All drawing views clear, dimensioned in millimetres and toleranced If the above is clear and you have proven agricultural machinery or heavy-equipment design experience, let’s get started.