SolidWorks Dynamic Structural Simulation

I need a SolidWorks specialist who can take my existing 3D model (or create one from supplied drawings if faster) and run a full structural study that captures the real-world dynamic behaviour. The component will be subjected to vibration, cyclic loads and short-term transient events, so the Simulation study has to go beyond a simple static check. Here’s what I’m expecting: • Clean, fully constrained CAD model in SolidWorks 2020 or later. • Dynamic study setup showing material properties, boundary conditions, mesh strategy and solver settings that suit vibration, cyclic and transient load cases. • Result set with stress, displacement and factor-of-safety plots for each load type, plus a brief comparison of critical regions across the three scenarios. • A short PDF report summarising assumptions, methodology and key findings so I can forward it to our certification team. Native files (.SLDPRT/.SLDASM and .CWR) must also be included. Acceptance criteria: 1. Simulation runs without errors or warnings on my machine when I reopen the study. 2. Peak stresses and displacements converge within 5 % after at least two mesh refinements. 3. Report clearly identifies any areas that exceed allowable limits and recommends design tweaks if necessary. If you have recent examples of similar dynamic studies in SolidWorks Simulation, feel free to reference them so I can gauge fit.