arrow_back फ्रीलांस पर वापस
F

KiCad ESP32 PCB

Freelancer

साझा करें:
placeCH home_workरिमोट assignmentअनुबंध publicएकत्रित नौकरी · CH

event18 नव॰ 2026 को प्रकाशित · verifiedहमने 18 नव॰ 2026 को पुष्टि की कि यह अभी भी लाइव है

क्या यह आपका व्यवसाय है?

US$ 30 – US$ 250 प्रति परियोजना

नौकरी के बारे में

KiCad PCB design – ESP32-S3 battery-powered device (schematic review + layout) Project: Round PCB (approx. Ø74 mm) for a waterproof device. 1-cell Li-ion 21700 (6 Ah), 3 A USB-C charger (BQ25895), cell protection (BQ29700 + dual MOSFET), fuel gauge (MAX17048), 3.3 V buck-boost, 5 V boost for a laser TOF sensor, ESP32-S3-WROOM-1 (antenna on module or uFl antenna), 24 addressable LEDs (SK6812MINI), push button. Available: KiCad schematic (v0.4, ERC clean), BOM with footprints, 3D enclosure (STEP) with all mechanical constraints. Scope: Review the schematic and propose fixes (power, protection, USB-C, ESP32 boot/USB). Finalise the open parts (USB-C waterproof receptacle, battery clip footprint). Board outline from the STEP file, placement respecting the enclosure (battery clips, TOF sensor, USB-C, antenna keep-out). Routing (2 or 4 layers, your recommendation), DRC clean. Fabrication outputs for JLCPCB assembly: Gerbers, BOM, CPL.

Requirements

KiCad 8 or 9. Experience with ESP32 RF layout, switching regulators and Li-ion charging/protection. All source files and IP transferred to the client.

मुफ़्त में पढ़ना जारी रखें

पूरी नौकरी देखने और आवेदन करने के लिए एक मुफ़्त खाता बनाएं।

  • badgeपोर्टफोलियो कंपनियों को दिखाई देता है
  • notificationsईमेल द्वारा नया जॉब अलर्ट
  • favoriteमुफ़्त सदस्यता, कभी भी रद्द करें