arrow_back फ्रीलांस पर वापस
F

2-layer ESP32 PCB design review before fabrication (KiCad)

Freelancer

साझा करें:
placeTR home_workरिमोट assignmentअनुबंध publicएकत्रित नौकरी · TR

event17 नव॰ 2026 को प्रकाशित · verifiedहमने 18 नव॰ 2026 को पुष्टि की कि यह अभी भी लाइव है

क्या यह आपका व्यवसाय है?

US$ 30 – US$ 60 प्रति परियोजना

नौकरी के बारे में

We need an experienced hardware engineer to review a 2-layer PCB (schematic + layout) before we order 5 assembled prototypes at JLCPCB. Board: 2-layer, 110 x 85 mm, 1.6 mm, KiCad 9. DRC and ERC are clean; we want a second pair of eyes on the design itself. Main blocks: - ESP32-WROOM-32E module (antenna keep-out and board-edge placement) - 5 V USB-C input, TVS, PTC and TPS259470 eFuse (UVLO/OVLO divider, current limit, dV/dt) - 1117-type 3.3 V LDO (thermal margin) - CH340C USB-UART with EN/IO0 auto-program circuit, USB ESD protection, USB-C CC resistors - 4x 74HCT245 level shifters (3.3 V GPIO to 5 V) driving 2x HUB75 and 2x HUB12 LED panel connectors - DS3231 RTC with CR2032 backup, I2C pull-ups - MT3608 5 V to 12 V boost driving a horn through an N-MOSFET low-side switch Deliverable: a written review covering schematic and layout, listing concrete issues with designator/net, a short explanation and a severity (critical / should fix / minor). Delivery within 3 days of receiving the files. Files shared with the awarded freelancer only: KiCad project, Gerber, BOM, CPL (pick-and-place), schematic PDF. In your bid please state: 1) Your experience with ESP32 boards (designs you have reviewed or built) 2) Your experience with JLCPCB assembly (BOM/CPL, part rotation issues) 3) Your delivery time Fixed price. No design changes needed from you, only the review.

मुफ़्त में पढ़ना जारी रखें

पूरी नौकरी देखने और आवेदन करने के लिए एक मुफ़्त खाता बनाएं।

  • badgeपोर्टफोलियो कंपनियों को दिखाई देता है
  • notificationsईमेल द्वारा नया जॉब अलर्ट
  • favoriteमुफ़्त सदस्यता, कभी भी रद्द करें