STL Shadowbox Lamp Base

I need a printable STL model for a small shadow-box lamp base. The design must house two AA batteries, an on/off switch, and a single LED light module that will be mounted upside-down so it shines back into the box. Please include a simple light stand or riser integrated into the base so the LED module sits at the correct angle toward the artwork. The battery compartment should be easy to open for quick swaps and leave enough clearance for basic wiring. I would also like a clean channel or pocket for the switch so it sits flush with the outer wall. Acceptance criteria: • One watertight STL file ready for FDM printing (no mesh errors, max 0.2 mm layer planning). • Compartments accurately sized for two AA cells in series, standard toggle or slide switch, and a common 5 mm single-LED module. • LED mount oriented upside-down and centered so light projects into the box without obstructing the viewing window. • Overall footprint no larger than 120 × 80 mm and printable without supports where possible. If you have any questions about component clearances or print orientation, let me know and I can share dimensions or sketches.