Test Adapter PCB Design (Altium Expert Needed)

PCB Design for Connector Test Adapter Boards (Altium Designer Preferred) I am looking for an experienced PCB designer to create two simple test adapter PCBs, one for each connector type shown in the attached drawing. The board does not contain any active electronics. It is only a passive test adapter with 3 connectors used to verify cable/connector assemblies. Project Scope The attached mechanical drawing already includes: PCB dimensions Connector references and positions Pin mapping between connectors Two DB25 connectors (or equivalent) used as the interface The task is to design: PCB #1 TE Connectivity Header: 3-2834465-6 (36 positions) 2 × DB25 female connectors (or compatible equivalent) Pin-to-pin mapping exactly as indicated in the drawing PCB #2 Molex Header: 505448-3831 (38 positions) 2 × DB25 female connectors (or compatible equivalent) Pin-to-pin mapping exactly as indicated in the drawing Deliverables I would like the designer to provide: Complete schematic PCB layout Manufacturing Gerber files Drill files Bill of Materials (BOM) Pick & Place file (if applicable) Native Altium Designer project files (preferred) Additional Requirements Add 4 mounting holes for spacers/standoffs so the board can be securely supported during testing. Clearly label the PCB with the board name/reference shown in the drawing. Standard FR4 PCB, no special impedance or high-speed requirements. Design should be ready for manufacturing without further modifications. What I Will Provide Mechanical drawing with dimensions. Connector references. Pinout table and wiring information. Please Include in Your Proposal Experience with Altium Designer. Examples of similar adapter, breakout, or test fixture PCBs. Estimated cost for the complete design package. Estimated lead time.