Wire Acorn Controller to Lint 1325 - 01/11/2026 12:05 EST

I have a Lint 1325 CNC that is still sitting bare—motors, spindle, limit switches, and e-stop are all waiting for their first pulse. My goal is to bring it to life with a Centroid Acorn Six controller, and I need an expert hand to get every wire landed in the right place. What I need first and foremost is the full hookup and verification of the Acorn controller: power, I/O, drives, spindle relay, everything. Nothing on the machine is wired yet, and I do not even know whether the installed motors are steppers or servos, so you will need to help identify them before finalizing pin assignments and current settings. Once the hardware is connected, I’ll rely on you to power up safely, confirm signal integrity, and jog each axis without faults. If any adjustments to parameters, firmware, or Centroid software are required to achieve smooth motion, those are part of the brief. Deliverables • Complete wiring diagram specific to this Lint 1325 + Acorn Six combination • Verified connections for motors, drivers, spindle control, limit switches, and e-stop • Successful first jog and spindle on/off test documented with screenshots or short video • A concise checklist of settings changed inside the Acorn software for future reference I can provide photos, manuals, and real-time video of the cabinet as needed, and I’m comfortable handling tools under your guidance. Remote support is fine so long as we reach a fully functional, ready-to-cut machine.